Tag Archives: Unstitching

Unstitched

Yesterday I began quilting a gift for someone special. You may have seen the top before in this post. It’s been patiently waiting while I ventured through the Delectable Mountains, completed (except binding) a project with my small group, and survived Fire and Ice.

Sometimes I have trouble getting the right thread tension, so I checked now and then and it looked very good.

I got done with the first pass of quilting. It’s an area about 16″ x 74″, or something like that. It looked good, went easily. I was happy. I rolled the quilt to advance it on the frame.  And I noticed … there was a big pleatey area all down the right side of the pass. The backing fabric hadn’t been pulled smooth and taut enough when I pin-basted the edge, so I stitched in pleats. 

I climbed under the frame to identify and mark the pleated areas with pins through from underneath. From the top, I found the quilting line that led through the pleats. I free-motion quilt, so the line can range a bit, wandering backwards and forwards, left to right. The quilting line covered a larger area than the pleats did, about 16″ x 12″. I made a fence with pins around it, to define where I needed to unstitch.

An area that took less than five minutes to quilt took more than an hour to unstitch.

Once I finished and removed the pins, I clamped the back fabric to pull it smooth. I sprayed the area lightly with water, on both the top and back of the quilt. With drying, the holes from stitching close up, and the fabric on the back dried taut, not saggy.

Today after going to the gym and errands, I’ll get back to the quilting. Wish me luck!

Advertisements

Tension, Chapter 2: The Unstitching

Today is a whole new day. This morning I spoke with the machine guy at Nolting, Dan Novak. Dan and I have chatted before. He is unfailingly helpful, even when the help isn’t what I want to hear. (For example, “The machine isn’t the problem,” as said a few years ago when I had a different model than I own now.)

Today Dan said that, like any other machine, my longarm needs some maintenance. After all, I’ve had this machine for more than four years, and I’ve probably quilted 80 or more quilts on it, most of them biggish. (By my figurin’, I’ve covered about 2000 square feet with quilting, or about the footprint of a typical house in the US.) In particular, I need to start by smoothing the tension disks with a piece of emery cloth. If that doesn’t work, I may need a new tension assembly, but we’ll cross that river when we get to it.

As it turns out, I don’t have a piece of emery cloth. Tomorrow I have a bunch of errands planned, and the hardware store will be on the list.

In the meantime, there is ALWAYS plenty to do. (Say it with me, friends: “There is ALWAYS plenty to do!”) Besides paying bills, making apple sauce, doing my nails, sweeping floors, reading, writing blog posts, and the like, I also have some work to do on the quilt project. Unstitching.

Yes, some people call it “ripping,” and some people call it “frogging” (similar theory — rip it, rip it!) I always call it “unstitching.” Sort of like I always call pantyhose “stockings.” It just sounds nicer to me. I’m weird that way.

Unstitching is a part of quilting. The fact of it does not bother me. The fact that there is SO MUCH is kind of a pain. Literal pain. Leaning over the quilt frame to pick tiny stitches kind of pain. Bent back, twisted neck kind of pain.

There are ways to make it easier. First, roll the quilt forward so the area to be picked is close. There’s no need to reach or lean very far. (Don’t worry, you can roll it back when it’s cleaned up.) Then pull up a stool. Sit. Use good tools. My two favorite tools are these:

20160202_160813

That’s a Clover seam ripper and a Fiskers blunt-tipped children’s school scissors. Another help, if you have a large section to unstitch, is a way to mark the bad area. I used a couple of long straight pins as flags. But I also thought marking the area with blue tape, like marking a crime scene for a dead body would work, too.

Once the unstitching is done, there is another task. I will sew a piece of muslin along the bottom edge of my backing. The longarm can make that stitch. It won’t matter if there is loopiness and bad tension. Once the muslin is sewn on, I’ll unpin the quilt backing from the frame’s leader on the frame front. (If you don’t use a longarm, you may be unfamiliar with the terms. The leader is the piece of canvas I’ve attached the backing to, to create the bottom of the quilt sandwich.) Then I’ll pin the muslin to the leader, extending the backing or bottom layer. This will give me space to test my stitch tension after I’ve smoothed the disks and rebuilt the tension assembly.

Only then will I take the tension assembly apart.

Say it again, friends: There is ALWAYS plenty to do!